There seems to be a lot of discussion about whether gypsum is the best false ceiling material or whether POP is the clear winner in terms of false ceilings. Let’s figure out, if it is Gypsum or Pop, what alternative is better. There are a lot of assumptions regarding the primary material to be used for false ceilings. These are necessary aspects in building homes and guarantee visual appeal elegance in every space while preventing extreme cold, heat, and ambient noise. They are also helpful in the careful disguise and dissimulation of electrical cables and wires. However, it is worth mentioning the stability of a falling ceiling as the material option is largely the same.
Which is the best false ceiling material? Gypsum Board or POP Filling
The debate for the best false ceiling material is not new. If you are planning for a home interior then you should have also thought about the false ceiling. But the question for the best false ceiling material remains the same. For a clear understanding, firstly you need to understand the difference between the two.
Gypsum boards are industrial-made Calcium Sulphate Panels used for false ceilings, also known as plasterboards. They are hydrated. Gypsum boards are available in thicknesses of 9, 12, and 15 mm. The sizes are easily installed. Thus, mounted on a metal plate supported on the ceiling. Gypsum boards are used in office interior spaces for false ceilings and as wall panels.
Plaster of Paris (POP)
Plaster of Paris (POP), is mostly dehydrated or powdered gypsum or calcium sulphate. Water combines with a dry powder to solidify and form the Plaster of Paris. The compound begins to set in approximately 10 minutes and solidifies to achieve strength and stiffness in the form of interlocking crystals. The paste is applied on a chicken mesh, moulded to the required shape, and dried until it is hard enough. POP ceilings are smooth, mouldable, and fit perfectly into unpopular places.
Key differences of using Gypsum Board and POP for the false ceiling
|1||Cost||Firstly, Gypsum is expensive than POP.||POP is 25% cheaper than gypsum boards.|
|2||Material Wastage||They are of standard sizes and hence the material wastage is quite high.||Wastage is less as you can mix only the desired amount|
|3||Life Expectancy||It lasts for years.||Life expectancy is high.|
|4||Finishing||It needs POP slurry to fill joints.||Seamless joints and high-quality finishings.|
|5||Installation time||It requires less time for installation as they come in standard size. Thus making itself a feasible best false ceiling.||The installation for POP is time-consuming as it is a laborious task.|
|6||Mouldability||Also, gypsum boards cannot be moulded because of the standard sizes. This is also one of the major drawbacks of the Gypsum false ceiling.||Can be given the desired shape of any kind.|
So, these were the major differences between the Gypsum Ceiling and POP material. Which one is your best false ceiling? Choose wisely. Contact us for more information and any suggestion. Keep exploring our blog section for such informative blogs.
Visit Our Social Channels